Published at Tuesday, 06 March 2018. Floor Lamps. By Orane Perreault.
Of course there are many other kinds of antique floor lamps such as torchiere, two light, curved arm, swing arm, etc. Even the oldest and most dilapidated of these well built heirlooms can be brought back to life with some scrubbing, sanding, painting, rewiring and sometimes soldering or welding.
It is also sometimes necessary to measure the space that will be used for the floor lamp. Aspects such as the height are essential. The uplight top edge should be higher than the standing person's level. While the reading lamp's lower edge needs to be below the eye level. This measurement ensures decreased exposure to the bare bulb glare.
The central light takes a 3 way bulb (low-medium-high) that is often a MOGUL size which is larger than a standard socket with higher wattage (100-200-300 watts). The three arm lights are controlled by a switch that can turn on separately just 1, 2 or all 3 of the arm lights. Further, many of these JUNIORS had a small light under the base which provided a very subtle night time floor light operated by a foot switch mounted on the side of the base.
Any content, trademark’s, or other material that might be found on the Eatstatusku website that is not Eatstatusku’s property remains the copyright of its respective owner/s. In no way does Eatstatusku claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 Eatstatusku. All Rights Reserved.